Advertisement
Quick Links
Operating
Instructions
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have fin-
ished reading the instructions, put them away in a safe place
for future reference.
In some countries or regions, the shape of the power piug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting
and operating the unit is the same.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
[For Canadian model]
CAUTION:
to prevent ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenin Les cHOcs ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
TWO VOLTAGE SELECTOR SWITCHES
Only
multi-voltage
models
are
provided
with
these
switches. U.S. and Canadian models are not provided with
these switches.
Mains voltages in Saudi Arabia are 127 V and 220 V only.
Never use this model with 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel. Before
|
FEATURES
CHECKING ACCESSORY ITEMS.
BEFORE OPERATION
ANTENNA CONNECTIONS
CONNECTIONS
PANEL FACILITIES
REMOTE CONTROL UNIT FACILITIES
TURNTABLE FACILITIES
|
HOW TO HANDLE CASSETTE TAPES .
|
GRAPHIC EQUALIZER CONTROLS .........eeceeeeee 12
CONTENTS
STEREO CASSETTE DECK RECEIVER
RX-1180/RX-1190
STEREO TURNTABLE
PL-777AZ/PL-B8882Z
The Model PL-888Z is not soid in the U.S.A. and Canada.
your model is shipped from the factory, these switches are
set to the power requirements of the destination. Check they
are set properly before plugging the power cord into the house-
hold wall socket. {f the voltage is not properly set or if you
move to an area where the voltage requirements differ, adjust
the selector switches as follows.
1. Use a medium-size screwdriver.
2. First, insert a screwdriver into the groove of the voltage
selector at the top, and adjust so that the tip of the groove
points to the voltage value of your area.
3. Next, insert a screwdriver into the groove of the voltage
selector at the bottom and adjust until the voltage is the
same as at the top.
Both switches must be
in the
same
switch
setting.
@
Hove tev >
ov~240v
CHANNEL STEP/FM DE-EMPHASIS SWITCH
Only multi-voltage models are provided with these switches.
U.S.
and Canadian
models
are not provided
with these
switches.
The unit has been factory preset to the channel allocation and
de-emphasis value for the area in which it is to be sold. If these
value are set incorrectly, the frequency display may stop at
the wrong frequency, or sound may be distorted, resulting in
an inability to reproduce reception signals at their proper sound
quality. For this reason, be sure to confirm that the values are
set correctly before first using the unit.
{100 kHz/10 kHz/75 ys] position:
Set to this position for areas with FM
reception step of 100 kHz, AM 10 kHz,
and de-emphasis 75 xs.
[50 KHz/9 kHz/50 us] position:
Set to this position, for areas with FM
reception step of 50 kHz, AM 9 kHz,
and de-emphasis of 50 us.
When unsure about the channel allocation
and de-emphasis values for your area, con-
sult your dealer for correct information.
DE-EMPHASIS
100/10
kHz
|
PRELIMINARY OPERATIONS.
BASIC OPERATIONS ...
TAPE COPYING
RECORDING AND PLAYBACK
USING THE AUDIO TIMER.......0.000..-
eee
16
MIC MIXING
MAINTENANCE
TROUBLESHOOTING
SPECIFICATIONS
®Q PIONEER'
The future of sound and vision.
Advertisement
