Sony PS-LX55 Operating Instructions Manual page 10

TRACKING FORCE FINE ADJUSTMENT
The tracking force has been correctly adjusted at the factory. Make
fine adjustment only when the tracking force is so light that the
stylus skips grooves.
Slide the tracking force adjustment lever
towards + (forward) for heavier tracking
force or towards — (backward) for lighter
tracking force.
SYNCHRONIZED PLAY OF THE TURNTABLE AND A CASSETTE DECK
— with an RM-65 synchro remote control unit connected
Record recording starts only when the START/STOP or ARM
LIFTER button is pressed. When the tonearm lowers onto the
Cassette decks which can be used with your turntable for
record, the cassette deck goes into the record mode and when the
tonearm is lifted up, the deck goes into the auto record muting
mode for four seconds, then into the pause mode.
this special synchronized operation are those Sony models
which are equipped with a 4-pin remote control jack.
An RM-65 synchro remote control unit (optional) is required
to connect the turntable and the cassette deck.
CONNECTION AND PREPARATION
to the
recording to the PHONO
outputs inputs
RECORDING
Desired action
To record from the beginning of a
record...
To lift up the tonearm to move to a dif.
ferent point on a record...
ee ee ee
To record from a point some way in the
record..
To stop feédrainig-ducing. rec during record play...
When record play ends...
Note:
10
(4 Turn th the power on
ie ies
:
and set the input >|
i
selector to PHONO. | record speed.
riers, pone
unit
Sew Turn the power on, place a
record, select the correct
RM-65 synchro
remote control
(optional)
4 Set the SYNCHRO switch
to ON.
Turntable operation
Press the START/STOP button.
| 2} Adjust the recording level
i and set the cassette deck in the |
record standby mode by
pressing the record and forward
buttons together with the pause
button.
|
Cassette deck
ier
to the remote
control jack
to the
LINE IN
jacks
Cian
Synchronized operation of the cassette deck
When the tonearm lowers onto the record, the
pause mode is released and recording begins.
Press the ARM TRANSPORT buttons.
Move the tonearm to the desired point and
press the START/STOP button.
Press the START/STOP button.
The tonearm returns automatically to the
arm rest.
When the tonearm is lifted up , auto record
muting activates for four seconds, then the
pause mode is assumed.
When the tonearm lowers onto the record, the
pause mode is released and recording begins.
When the tonearm is lifted up, auto record
muting activates for four seconds, then the
pause. mode is assumed.
When the tonearm is lifted up, auto record
muting activates for four seconds, then the
pause mode is assumed.
Be sure to set the SYNCHRO switch of the RM-65 to OFF when you do not want to use the synchronized play function.