Pioneer CT-1040W Service Manual page 5

CT- 1040 W
Disassembly Procedures
1. Undo screws @ to remove the bonnet.
2. Undo screws @ , and using a screwdriver
push panel stay hooks A (four positions
along the top) and hooks B (two positions
along the bottom) to remove the front panel
assembly.
3. Undo screws © to open the control unit and
expose the adjustment locations.
4. Undo screws @ to remove the stay.
5. Undo screws @ to remove the counter.
6. Pull push-knobs A, B and C forward and undo
screws @ to remove the panel stay.
7. Undo screws @ and disengage the hook to
remove the operation switch A unit.
8. Undo screws @ and @ to remove the me-
chanism units (deck A and deck B).