Watch a connected device Network and the Internet Common interface Troubleshooting General issues Channel issues Picture issues Sound issues Connection issues Network issues Contact Philips Product specifications Power and reception Display and sound Display resolutions Multimedia Connectivity Supported TV mounts Help version Index...
Add a new dimension to your calls and contact your friends and relatives on the big screen. You can make video calls on your TV with a Philips HD Media box and a Philips TV video camera (both sold separately). Enjoy...
Intuitive menus With the TV's intuitive menus, you can easily access the channel or media file that you want or tweak the TV settings to suit your needs. TV controls Rear controls 1. : Switch the TV on or off. 2.
TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Page 6
TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.
Page 7
Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Terms of warranty ...
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products.
1 year. You can also find the power consumption values for the product on the Philips website for your country at www.philips.com/TV. Help and support Use Help To access the onscreen Help menu, press the Yellow button.
Page 10
Chat online with our support personnel (available in certain countries only) Search the TV forum Your question may have already been answered by the Philips TV community of users. Visit www.supportforum.philips.com. Contact Philips You can contact Philips Consumer Care in your country for support.
2 Use your TV Watch TV Switch TV on or off Switch the TV on Press the power switch on the TV. If the TV is in standby, press remote control. Note: There is a short delay before the TV responds.
Page 12
Switch TV channels Press CH +/- on the remote control or Press the Numeric buttons to enter a channel number. Manage favourites You can view all channels or only a list of your favourite channels so that you can find them easily.
Page 13
3. Select [Hide channel], then press OK. The channel is hidden. Unhide channels 1. While you watch TV, press OPTIONS. 2. Press 3. Select [Show hidden channels], then press Hidden channels appear in the channel list, but the channel information is not displayed. 4.
[Game]: Ideal settings for games. [Drama]: Ideal settings for drama programmes. [Sports]: Ideal settings for sports. Change picture format You can change the picture format to suit the video source. ADJUST. 1. Press 2. Select [Picture format], then press OK. 3.
A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router Philips wireless USB adapter (PTA01) for WiFi-ready models, or a LAN cable that connects your TV to your home network A media server program running on your computer ...
Page 16
Caution: Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data in the device. Do not overload the USB port. If you connect a USB storage device that...
Internet. 2. On your TV, configure Smart TV. 3. (Optional) On your PC, register with Philips to enjoy exclusive benefits and receive updates on product information. You can register at any time. Connect the TV to the Internet 1.
Page 18
Tips: You can search for apps available in other countries. To return to the Smart TV home page, LIST. press Note: Smart TV services are updated automatically. To view the latest updates, change [All] to [New] in [App Gallery]. Access websites 1.
1. Switch on the TV. 2. Connect the USB flash drive to a USB slot on the TV. 3. Press to start formatting the drive. 4. After formatting, leave the USB drive connected to the TV. Access a video store 1.
Page 20
Access interactive TV Most channels that offer interactive services invite you to press the Red button or OK to open their interactive programme. 1. Switch to a digital channel with interactive services. While the application is loading, a blinking symbol is displayed. When the application has loaded, an icon is displayed.
To pause TV, you must connect a USB hard drive to the TV and format it. Caution: Philips is not responsible if the USB hard drive is not supported, nor is it responsible for damage or loss of data in the device.
Pause a live TV broadcast 1. On a digital channel, press TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing.
Page 23
To record TV shows, you must connect a USB hard disk to the TV and format it. Caution: Philips is not responsible if the hard disk is not supported, nor is it responsible for damage or loss of data in the device.
Page 24
To change the date, select the date at the top of the page, then press OK. Select a date from the pop-up window, then press OK. 3. Select the programme, press OPTIONS, then select [Record]. 4. To record beyond the time when the programme is scheduled to end, change the recording time.
Play games Add a game console You can play games projected on your TV. Before you start, connect your game console to this TV. Read Connect your TV > Connect devices > Game console (Page 44). For easy access, add the game console to the Home menu.
Subpages If the text page contains several subpages, you can view each subpage in succession. These subpages are shown on a bar next to the main page number. If subpages are available, press select them. Search You can search for a word or number that exists on the current text page.
Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. After you have switched on Philips EasyLink, the following features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.
Page 28
Synchronise audio If you connect your TV to a home theatre, you can synchronise the audio and video to avoid lag between the picture and sound. Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link to retain picture quality.
Page 29
(HTS) and there is a lag between the picture and the sound, you can synchronise them. If you are using a Philips HTS, the audio and video are automatically synchronised. For other HTS brands, you need to switch on the audio sync delay on the TV to synchronise the audio and video.
TV is in standby. ADJUST to receive audio from 1. Press the connected Philips EasyLink device. If available, audio only mode is switched on. 2. Accept the prompt on the TV to turn off the TV screen.
4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2.
[Picture shift]: Move the position of the picture. You cannot select this setting if the selected picture format is [Auto fill], [Auto zoom] or [Wide screen]. More sound settings You can change the settings in the Sound menu. 1. Press . 2.
Page 33
Tip: Press LIST to see the channel list. Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Install analogue channels You can search and store analogue TV channels one-by-one.
Page 34
Copy channels ATTENTION: This feature is intended for dealers and service personnel. You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV.
7. If the country setting is different, reinstall the second TV to match the country setting of the first TV. See Set up your TV > Restore default settings (Page 39). 8. Connect the USB storage device to the second TV. 9.
3. If no satellite is found, select [Search] to scan again or [Next LNB] to skip to the next LNB. If there are no free LNBs available, remove a satellite first. If you are satisfied with the added satellite, install the channels.
1. Press . 2. Select [Setup] > [TV settings] > [Preferences]. 3. Select [Universal access] > [On] or [Off], then press OK. Hearing impaired access Tip: To make sure that a hearing impaired audio language is available, press OPTIONS, then select [Audio language]. Languages with an ear icon support hearing impaired audio.
Caution: Do not install a lower version of software than the current version installed on your product. Philips cannot be held liable or be made responsible for problems caused by a software downgrade. Update the software through one of these methods: ...
Note: If the TV is connected to the Internet, the TV displays the availability of new software at startup. Restore default settings You can reset all picture and sound settings and reinstall all TV channels on your TV. 1. Press . 2.
5 Connect your About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better.
SCART A SCART connection combines video and audio signals. Use the supplied SCART adapter cable to connect devices. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable. You can connect VGA to display PC content on the TV.
Page 42
Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the disc player to the TV. TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on certain models only.) Connect the satellite or digital TV receiver to the TV with an HDMI cable.
Page 43
Use the supplied adapter cable with a SCART cable to connect the satellite or digital TV receiver to the TV. Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the receiver to the TV. Video recorder Connect the recorder to the TV with an antenna cable.
Page 44
Use the supplied adapter cable with a SCART cable to connect the recorder to the TV. Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the receiver to the TV. Game console Connect the game console to the TV with an HDMI cable.
Page 45
Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the game console to the TV. Home theatre Connect the home theatre to the TV with an HDMI cable and an optical cable. Use the supplied adapter cable with a SCART cable to connect the home theatre to the TV.
Page 46
Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the home theatre to the TV. Digital camera Connect the digital camera to the TV with a USB cable. Digital camcorder Connect the digital camcorder to the TV with an HDMI cable.
Use the supplied adapter cables with a component video (Y Pb Pr) cable and an audio (L/R) cable to connect the camcorder to the TV. Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable. Computer Connect the computer to the TV with an HDMI cable.
Page 48
Connect the computer to the TV with a DVI-HDMI cable and an audio cable. Connect the computer to the TV with a VGA cable and an audio cable. Keyboard and mouse USB keyboard You can connect a USB keyboard to enter text such as device names on the TV.
Connect the keyboard and mouse to the TV with a USB cable. When the TV detects the keyboard, you can select the keyboard layout and test your selection. If you have selected a Cyrillic or Greek keyboard layout first, you can also select a secondary Latin keyboard layout.
4. Follow the onscreen instructions. If you are prompted to select the TV connection, select the connector that this device uses. Rename device After you have added a new device to the Home menu, you can rename it. 1. Press . 2.
Page 51
Start wireless setup 1. Switch on your wireless network router. 2. Connect the Philips USB adapter PTA01 to a USB connector on the TV. The wireless installation starts automatically. 3. Follow the onscreen instructions.
Most new wireless routers have the WPS system and carry the WPS logo. The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP (Wired Equivalent Privacy) security encryption. If you still need the WEP devices in your network, install with [Scan] >...
Page 53
1. Switch off the TV. 2. Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV. Push the CAM in as far as it will go. 3. Switch on the TV, then wait for the CAM to be activated.
Disconnect the power cable from the power outlet. Wait until the TV cools down before you reconnect the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the 4-digit code to unlock the channel blocking feature (child lock): Enter ‘8888’.
Make sure that the correct device is selected as the display source. Make sure that the external device or source is properly connected. There is sound but no picture: Make sure that the picture settings are set correctly. There is poor TV reception from an antenna connection: ...
There is a picture but sound comes from one speaker only: Make sure that sound balance is set to the centre. Connection issues There are problems with HDMI devices: Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device.
Philips TV community at www.supportforum.philips.com. If you wish to speak to or email a Philips representative, contact the Philips Consumer Care in your country. You can find the contact details in the leaflet accompanying this TV or at www.philips.com/support.
Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2). The maximum power rating, stated between brackets, is used for electrical safety (IEC 60065 Ed.
Page 59
Ethernet LAN RJ-45 JPEG (*.jpg) Supported image files Supported audio/video files Multimedia file names must not exceed 128 characters. Supported audio/video files Multimedia file names must not exceed 128 characters. Supported audio/video files Multimedia file names must not exceed 128 characters.
107 cm / 42 inches: 400mm x 400mm, M6 119 cm / 47 inches: 400 mm x 400 mm, M6 Warning: Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.
Page 63
EasyLink, enable - 28 EasyLink, features - 27 EasyLink, onscreen control - 5 EasyLink, remote control buttons - 28 EasyLink, TV speakers - 29 end of use - 9 energy efficient, settings - 8 Energy label - 9 EPG, broadcaster - 14 EPG, Electronic Programme Guide - 3 EPG, Internet - 14 external hard disk - 47...