Black & Decker BPZ12SS Instruction Manual page 8

ENglIsh
3. Fasten M5 serrated flange lock nuts
adjustable leg studs with the box wrench
Fig. J.
4. Repeat for all four corners.
Fig. H
Fig. I
Fig. J
6
17
onto the
7
as shown in
14
3
16
15
16
17
7
Attaching Peel Hangers (Fig. K)
Wood and metal peels can be hung off the front of the middle
18
shelf .
19
1. Slide a standoff through the middle shelf standoff hole
NOTE: Standoff holes are on the same side of the middle shelf
as the BLACK+DECKER logo
11
2. Place washer on threaded section of standoff and twist
22
M5 nylon lock nut
tighten with the box wrench
3. Repeat for second standoff.
Fig. K
20
19
13
Attaching Brackets (Fig. L – O)
NOTE: Leave all nuts and screws loose until assembly
is complete.
1. Align the right bracket shelf hole
25
bracket hole . Slide the M5 washer
26
bracket screw . Slide the M5 bracket screw through both
holes. Fasten the M5 serrated flange lock nut
M5 bracket screw with hex key
Fig. L
11
26
13
2. Align the right bracket leg hole
28
bracket hole . Slide the M5 washer onto the M5 bracket
screw. Slide M5 bracket screw through both holes. Fasten
M5 bracket screw with hex key.
21
on the tabletop.
clockwise onto the standoff and
7 13
and hex key
24
with middle shelf right
11
onto the M5
17
onto the
13
and box wrench
27
with adjustable leg
20
.
.
7
22
18
7
.
7
17
24
25