Advertisement
This unit uses only standard Microcassette.
Non standard cassettes cannot be used
because their "L" dimension (see
illustration) is different.
PLAYBACK
To fast forward the tape
Slide the FF/CUE lever in the direction of
the arrow, with the function lever set to
STOP. To stop the tape, release the FF/CUE
lever.
To skip-over unnecessary portions
During playback, slide the FF/CUE lever in
the direction of the arrow. When you release
Only standard
Microcassettes have
a small indentation
Non standard
Standard / on side A.
Approx. 2.5mm
1 Set the POWER switch to ON.
2 Set SPEED to the same tape speed as
that used for recording.
3 Set the function lever to LISTEN.
4 Adjust the VOL control
During playback, the DICT/BATT indi-
cator lights.
To stop playback, set the function lever
to STOP.
To erase the entire tape contents
Use the BE-2 or BE-9H cassette eraser
(optional).
For private listening, connect the earphone
to the EAR jack.
Advertisement
