Table of Contents
Advertisement
| CA-MX55MBK
Erasing a Tape
1.
Insert the tape to be erased into deck B.
When you want to erase both sides, press the REV. MODE button so
the indicator lights.
. Press the Pause ll button while simultaneously pressing the REC/
REC MUTE button.
:
This puts the deck in REC/PAUSE mode.
. Press the SOURCE SELECTOR button on the amplifier to select
the TAPE.
. Press the <j or [> button (depending on which side of the tape
you want to erase) on deck B.
The erasure of the tape begins.
Direct Recording from the CD Automatic
Changer
Direct recording permits a tape deck to start recording automatically in
synchronism with a CD Automatic Changer.
1. insert the cassette for recording into deck B.
If you wish to record on both sides of the cassette, press the REV.
MODE button so the indicator lights.
. Set the magazine.
. Press the CD DIRECT REC button on the Tape Deck.
CODIREGT REC
The CD Automatic Changer and the Tape Deck are activated, and
recording begins with the first track of Disc No.1.
To stop direct recording, press the Stop ™ button on deck B or the
STOP/CANCEL button on the CD Automatic Changer.
Note:
If you press the Disc button, Kéd or bP button during recording, the
track to be recorded is changed.
Recording CD Tracks in Auto-Edit Mode
in Auto-Edit mode, tracks from the CD will automatically be selected to
determine which tracks should go on side A of the tape and which should
go on side B.
The selection is based on the lengths of the tracks and the length of the
tape.
This ensures a proper "fit" of the tracks recorded on the tape. It prevents
a track from being cut off when the end of the tape is reached.
1.
Insert the cassette for recording In deck B.
When you want to record both sides of a cassette, select reverse mode
by pressing the REV. MODE button so the indicator lights.
. Set the magazine.
. Press the STOP/CANCEL button on the CD Automatic Changer.
. Press the EDIT button on the CD Automatic Changer and select the
Auto Edit mode.
The A. EDIT indicator lights.
eor
Cy
. Enter the length of the tape to be recorded using the +10 and +1
buttons.
ra TMe—
310
+1
For example: To set a period of 46 minutes, press the +10 button four —
times and press the +1 button six times.
6. Press the SIDE A/B button.
CO
¢
The CD Automatic Changer calculates which tracks should be placed
on side A and which should be placed on side B.
7. Press the Disc button and specify the Disc No. of the disc to be
recorded.
O- Or O-
O- O- O~
*
Ifyou use the Remote Controller, press the CD CHANGER button and
+h.
ifs
arti
+
then specify one of 1 to 6 with a numeric key.
fa
Moo
Meco
*
To change the disc, specify the Disc No. of another disc again.
*
To start recording the tracks on the selected CD with a track other the
first, press the Kd or PPI button on the CD Automatic Changer or
press the Ké€ or PPI button on the Remote Controller to specify the
track with which recording is to start.
Sal
'8. Press the MEMORY button on the CD Automatic Changer.
The Auto Edit program is created automatically. .
MEMORY
Cj
*
The last track to be recorded, the number of steps, and the remaining
time of side B of the set tape are shown on the display.
When you press the SIDE A/B button again, the last track of side A of
the set tape tobe recorded, the number of steps, and the remaining time
of the tape are shown on the display.
*
Tocheck the Auto Editcontents, press the CALL button. Each time you
press the bution, the track and step of the displayed side will show on
the display.
CAL
—)
Note:
¢
Up to 16 tracks can be allocated for each side of the cassette.
9. Press the CD DIRECT REC button on the Tape Deck.
CODRECT REC
*
The tape is automatically rewound to the beginning of side A, and then
recording begins.
¢
When the Tape Deck is set in the reverse mode, after the fast track is
recorded on side A, the tape deck high-speed-erases to the end of side
A. Then it changes direction to side B and begins recording the
remaining tracks.
¢
To stop recording, press the Stop M button on deck B, or press the
STOP/CANCEL button on the CD Automatic Changer.
Note:
«
During recording In the Auto-Edit Mode, do not operate the CD
Automatic Changer.
To cancel the Auto-Edit mode, press the STOP/CANCEL button on the CD
Automatic Changer, then press the PLAY MODE button.
17
(No. 20342) 19
Advertisement
Table of Contents
