Installation Work; Piping Connection Size - Hitachi E-102SN3 Installation Manual

INSTALLATION MANUAL FOR
MULTI-KITS

4 INSTALLATION WOrk

4.1 pIpING cONNEcTION SIzE

The ends of the multi-kits are finished as shown in the following
figures. Cut the end of the pipe to meet with the pipe size.
Model
E-102SN3
E-162SN3
High/low pressure gas line
c A u T I O N
Piping shall be supported with adequate space. Bent pipes and
bypass piping (horizontal loop) shall also be installed in order to
absorb piping elasticity caused by temperature changes.
PMML0277A - rev.0 - 12/2012
Liquid line
2