Pioneer CT-S507R Operating Instructions Manual

| Operating
Instructions
STEREO CASSETTE DECK
<JAUTO REVERSE
UR aoe
Thank you for buying this Pioneer product.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[FOR U.S. and Canadian modets]
The serial number for this equipment is located on the rear
panel.
Please write this
serial number
1n your enclosed
warranty card and keep it in a secure area.
This is for your
security.
[For Canadian model]
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the Ra-
dio Interference Regulations of the Canadian Department of
Communications.
{Pour le modéle Canadien]
The above illustration shows U.S. and Canadian model.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with
this switch.
U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and
220V only. Never use this mode! with 110V
setting in Saudi Arabia.
The fine voltage selector switch is on the rear panel. Before
your model is shipped from the factory, this switch is set to the
power requirements of the destination. Check that it is set
properly before plugging the power cord into the AC wall socket.
If the voltage is not properly set or if you move to an area where
the voltage requirements differ, adjust the selector switch as
follows.
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the arrow points to the
voltage value of your area.
Set the voltage selector
for the voltage in your area.
"This product complies with the Radio Interference require-
ments of the EC {European Community} Directive 87/308/EEC,"
@) PIONEER'
The future of sound and vision.