Philips PM 5132 Instruction Manual page 8

1.2.2.
Characteristic
Adjustments
Frequency indication
Setting error
Vernier frequency adjustment
Temperature coefficient
Short term drift
Long term drift
Signal output
Connection
Impedance
Load capability
Wave forms
Duty cycle
Open-circuit voltage
— setting range
maximum value
DC (offset) voltage
— button PUSH FOR ZERO pulled,
open circuit voltage
— button PUSH FOR ZERO or
WAVE FORM button DC pressed
Attenuation
— continuous
— fixed
Distortion (sinewave)
Linearity (triangular wave)
linear
— seven range-pushbuttons
— dia! with linear scale
— knob for fine-adjustment
— linear scale on the dial
42% +0,2 % of full scale
+5 % of the dial setting
<0,1%/K ranges I! - VI
<0,15 %/K ranges | - VII
<0,15% ranges Il - VI
<0,20% ranges |- Vilwithin 15 min.
<0,25 % within 7 hours
BNC socket
50 92/600 2, selected by pushbutton
short-circuit proof
rv sinewave
Av triangular wave
TL squarewave
MW positive squarewave
ur— negative squarewave
DC d.c. voltage without a.c.
+15 V
-10 to +10 V, continuously adjustable
<50 mV
<0,5 % in ranges | to V
<1 %inrange VI
<3 %inrange VII
<1%