Inserting/Removing The Scale Filter Insert; Storage - Silvercrest 322504 1901 Operating Instructions Manual

Inserting/removing the scale filter insert

The spout of the kettle is fitted with a scale filter 6 insert, which can become
clogged with particles or scale over time . To clean the scale filter 6 insert,
simply remove it from the appliance .
1) Open the lid .
2) Inside the jug, press the protruding tab on the scale filter insert 6 slightly
downwards so that the scale filter insert 6 can be removed .
3) Clean the scale filter insert 6 with a slightly moistened dishcloth and under
running water .
4) First, place the scale filter insert 6 with the lower lock in the recess inside the
kettle . Press the protruding tab on the scale filter insert 6 slightly downwards
and slide it under the holder . Ensure that the scale filter insert 6 clicks into
place properly .
NOTE
► If scale deposits have solidified in the scale filter insert 6, place the filter in
a water-vinegar solution with a ratio of 6:1 for a few hours . The scale de-
posits will dissolve . Rinse the scale filter insert 6 with plenty of fresh water .

Storage

■ Allow the appliance to cool down completely before putting it into storage .
■ Wind the power cable around the cable winder 5 under the base 4 .
■ Store the appliance at a dry location .
│ GB │ IE │ NI │ CY
■ 10
SWKS 2400 I1