Bosch 0600847A70 Original Instructions Manual page 21

14 | English
Grass trimmer
Protection class
Serial number
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to EN 62841-4-4.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4
– Vibration emission value a
h
– Uncertainty K
Mounting and Operation
Action
Product features
Delivery scope
Removing the transport safety
Connecting the shaft
Adjusting the Handle
Mounting the protection guard
Connecting the extension cable
Switching On and Off
Removing the line spool
Winding line on spool
Mounting the line spool
Line feeding
Maintenance, Cleaning and Stor-
age
Accessories
Assembly
Caution: Switch the garden tool off and pull the mains
u
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (7).
Connect the individual parts of the shaft until they can be
heard to engage.
F 016 L94 451 | (12.05.2022)
EasyGrassCut 23
dB(A)
dB
dB(A)
dB
2
m/s
2
m/s
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
Figure Page
the adjustment, press buttons (5) and move the handle to
the desired position. Release the buttons (5) again so that
A 214
the handle can engage.
B 215
C 215
Mounting the protection guard (see figure F)
D 216
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
E 216
Position the protection guard (6) on the trimmer head and
F 217
fasten it with the provided screw.
G 218
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
tion.
H 218
I 219
Operation
J 219
Pay attention to the mains voltage. The voltage of the
K 220 u
power source must match the voltage specified on the
L 220
rating plate of the machine.
Caution: Switch the garden tool off and pull the mains
u
M 221
plug before adjusting or cleaning.
The cutting line continues to rotate for a few seconds
u
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
Do not briefly switch off and on again several times in
u
a row.
Only use Bosch approved cutting elements. Cutting
u
performance will vary with different cutting elements.
Switching On and Off (see figure G)
To switch on, firstly press the lock-off button (2). Then
press the On/Off switch (3) and keep it pressed.
To switch off, release the On/Off switch (3).
/ II
see type plate on garden tools
3 600 HC1 H..
78
= 2.5
90
= 2.0
< 2.5
= 1.5
EasyGrassCut 26
/ II
3 600 HC1 J..
80
= 2.5
91
= 1.0
< 2.5
= 1.5
Bosch Power Tools