Sony Trinitron KV-27S26 Operating Instructions Manual page 19

Press repeatedly to step through available video inputs:
TV, Video 1 and Video 2 (KV-27S26, 27836, 29RS26, 29RS26C, 32826,
32836, 32TW26, 34RS26C, 35S26, 35S36, 37RS26 only)
TV, Video 1, Video 2 and Video 3 (KV-27V26, 27V36, 29V36C, 29V66M,
29V76M, 32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only)
Press to change the VHF/UHF input to the AUX input (KV-27S36, 27V36,
29V36C, 29V76M, 32836, 32V36, 34V36C, 35S36, 35V36, 35V76, 37V36M only)
For detailed connection information, see "Cable box and cable" or "Cable and
antenna" on page 3.
Press to turn off the TV and all other equipment connected with S-Link and
return the TV input to either antenna or AUX, whichever was last used.
Press this button to cycle through the Multi-channel TV Sound (MTS) options. (page 20
TVNVIDEO
SYSTEMOFF |
MTS/GUIDE
CAPTION VISION
Gi 3
4
[© | Texts
TEXT 2
[Š] Teer
pel > MENU
Use Œ
CAPTION
VISION
>] Fa
Some programs are broadcast with Caption
Vision. To display Caption Vision, select CC1,
CC2, CC3, CC4, TEXT1, TEXT2, TEXTS, or
TEXT4 from the menu, then press DISPLAY
until Caption Vision is displayed.
CC1, CC2, CC3, or CC4 shows you a caption,
that is, a printed version of the dialogue or
sound effects of a program. (The mode should
be set to CC1 for most programs) TEXT1,
TEXT2, TEXT3, or TEXT4 shows you text, that
is, information presented using either half or the
whole screen. It is not usually related to the
program.
Notes:
* Poor reception of TV programs can cause
errors in Caption Vision and XDS.
Captions may appear with a white box or
other errors instead of intended text.
* XDS, Caption Vision, and the status display
cannot be used at the same time.
15