Advertisement
4.2.
AC/DC INDICATION
4.2.1.
A red background and '+' sign indicates positive polarity.
4.2.2.
A green background and '-' sign indicates negative polarity."-" sign and green color background indicates negative polarity.
4.2.3.
If no "+" or "-" sign shows on the LCD, and the background light is red color, you are connecting with an AC voltage source. Please
stop the measurement.
4.3.
OVER-VOLTAGE WARNING
4.3.1.
Only use the tester within the specified voltage range. Exceeding this range may damage the tester and/or cause harm.
WARNING! Please stop the measurement if any of the following warnings appear on the LCD:
‰
4.3.2.
70 ~ 100V, "OL0" will show on the LCD
4.3.3.
100 ~ 200V, "OL1" will show on the LCD
4.3.4.
200 ~ 300V, "OL2" will show on the LCD
4.3.5.
> 300V, "OL3" will show on the LCD
4.3.6.
Voltage greater than 400V may damage the tester, please make sure the tester is not damaged before next measurement.
5. MAINTENANCE
5.1.
REPLACING THE BATTERY (FIG.3)
5.1.1.
Rotate the tail cover and pull out the PCB to replace the battery.
5.1.2.
Insert the new battery into the battery slot, with the positive side facing outward.
5.1.3.
If "Lo" and red color background light appears on LCD, it indicates low battery power. Please replace the battery.
5.1.4.
If the value on the LCD is flashing, it indicates low battery power. Please replace the battery.
5.1.5.
If nothing appears on LCD and the background light doesn't light up, it indicates no battery power or the battery polarity is reversely
installed. Please check the battery polarity or replace the battery.
5.2.
REPAIRS
NOTE: Repairs or servicing should only be performed by qualified personnel.
5.3.
CLEANING
5.3.1.
Remove grease and grime with a clean, dry cloth.
5.3.2.
Do not use abrasives or solvents. Do not use alcohol, ammonia or cleaners containing solvents..
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
Fig.3
www.sealey.co.uk
AK4013
Issue 2 (2,3,4)
28/04/23
Advertisement
