Advertisement
NN=9809, NN-9859, NN-9509
—MQssg9W, MQss69W
before handling the DPC.
NOTE: Do not use a soldering iron or desoldering tool of more than 30
watts on DPC contacts.
:
5, Fan motor and high voltage capacitor (NN models)
(A) Disconnect 2 lead wires from fan motor terminals.
(B) Disconnect 2 lead wires from fuse holder terminals.
(C) Disconnect 4 high voltage lead wires from high voltage capacitor
terminals.
(D) Remove 4 screws holding fan motor and orifice assy and detach the
orifice assy with fan motor from oven assy.
(E) Remove fan blade from the fan motor shaft by pulling it straight out.
(F) Separate the fan motor from the orifice assy by freeing 2 catch hooks
on the orifice assy.
To replace high voltage capacitor
(G) Remove 1 screw holding high voltage capacitor
6. Fan motor and high voltage capacitor (MQ models)
(A) Disconnect 2 lead wires from fan motor terminals.
(B) Disconnect 2 lead wires from fuse holder terminals.
(C) Disconnect 4 high voltage lead wires from high voltage capacitor
terminals.
we
INE
(D) Disconnect 1 lead wire from thermal cutout terminal.
(E) Remove 1 screw from power supply cord.
(F) Remove 1 screw holding oven reinforcement bracket.
(G) Remove 3 screws holding fan motor bracket and detach the fan motor
bracket with fan motor from oven assy.
(H) Remove fan blade from the fan motor shaft by pulling it straight out.
(1) Remove 2 screws holding the fan motor to the fan motor bracket.
To replace high voltage capacitor
(J) Remove 1 screw holding high voitage capacitor.
(NN models)
ORIFICE ASSY
REMOVE 4 SCREWS
FAN BLADE
HIGH VOLTAGE
CAPACITOR
02-012 _
(MQ models)
FAN MOTOR
BRACKET
FAN MOTOR
BRACKET
7
HV,
H.V.
CAPACI TOR
CAPACI TOR
Advertisement
