Packet Data - Nokia Mural 6750 User Manual

Connectivity
Service Discovery Application Profile, Generic Object Exchange Profile, Phone Book
Access Profile . To ensure interoperability between other devices supporting
Bluetooth technology, use Nokia approved accessories for this model. Check with
the manufacturers of other devices to determine their compatibility with this
device.
Features using Bluetooth technology increase the demand on battery power and
reduce the battery life.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and take the following
steps:
1. Select My phone's name and enter a name for your phone.
2. To activate Bluetooth connectivity, select Bluetooth > On.
Bluetooth connectivity is active.
3. To connect your phone to an audio accessory, select Conn. to audio acc. and
the device that you want to connect to.
4. To pair your phone with any Bluetooth device in range, select Paired
devices > Add new device.
Scroll to a found device, and select Add.
Enter a passcode (up to 16 characters) on your phone and allow the
connection on the other Bluetooth device.
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Accept Bluetooth communication only from those
you trust.
PC connection to the internet
Use Bluetooth technology to connect your compatible PC to the internet without
PC Suite software. Your phone must have activated a service provider that
supports internet access, and your PC must support Bluetooth technology. After
connecting to the network access point (NAP) service of the phone, and pairing
with your PC, your phone automatically opens a packet data connection to the
internet.

Packet data

General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity >
Packet data > Packet data conn. and from the following options:
● When needed — to set the packet data connection to established when
required by an application. The connection will be cut when the application is
closed.
28
Cyan Cyan Magenta Magenta
indicates that
Yellow Yellow Black Black