Kenwood CD-223M Instruction Manual page 15

Use the following procedure to select desired tracks (up to
32 tracks) from up to 200 discs and program them in the
desired order.
Preparation
• Load discs into the carousel. — .10
• Set the CD player to stop mode.
CD-223M/DPF-J3010 (En)
|Q
Press so that the PGM indicator lights.
Select the disc.
Select the track number.
Qj
Start playback.
■15
• When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected while looking at the recorded contents.
"Registration of Title Name"' —-[_2j)J
• If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
• Disc numbers which do not contain discs can be selected, but they are
canceled at the time of playback.
• To program the entire disc, press the SET key without inputting the
track number. "ALL" wiil be displayed.
• Program other tracks in the desired order by repeating steps S and B
• Up to 32 tracks can be programmed. " FULL" is displayed when no
more tracks can be programmed.
• If you make a mistake, press the CLEAR key and restart from step E
• Tracks will be clayed in tre older they were programmed ir cider of P
• When the or key is pressed during playback, tne track wi! oe
slopped in tne onect on of the pressed button.
t