Product - Sony BDV-E870 Operating Instructions Manual

Usingan S-AIR Product
When you purchase the S-AIR product, you
need to pert_nn the following settings to
activate wireless transmission.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier (optional):
You
can enjoy surround speaker sound
wirelessly.
- S-AIR receiver (optional): You can
enjoy system sound in another room.
Room A
S-AIR main unit
\
S-AIR sub unit v
(surround amplifier)
Room B
S-AIR sub unit
(S-AIR receiver)
(not supplied)
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws directly below the
z_ mark.
Rear of the unit
L
• Remove the screws that are indicated in the
illustration. Do not remove other screws.
Insert the wireless transmitter.
Rear of the unit
To make use of the S-AIR fuuctiou, you ueed to
iusert the wireless trausmitter iuto the uuit aud
the wireless trausceiver iuto the S-AIR sub uuit.
• Insert the wireless
transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the •
marks are aligned.
• Do not insert anything other than the wireless
transmitter into the EZW-TI00 slot.
42us