Nokia TA-1021 Get Started

Get started
Nokia 6
TA-1021/TA-1033 EN 1.0
1. Insert the SIM and memory
card
1. Open the SIM and memory card tray by putting
the provided tray opener into the hole next to the
tray.
2. Put the nano-SIM into the slot 1 with the contact
area face down. If you have a second SIM, put it
into the slot 2, or, if you have a memory card, put
the card into the memory card slot located in the
SIM slot 2.
3. Slide the SIM and memory card tray back into
the slot.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
XXXXXXXXXXX
Main camera
Charger connector
Loudspeaker
Microphone
2. Charge the battery and switch
Audio connector
Microphone
SIM cards
MicroSD card
Home
your phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides
you through the setup.
USB micro-B USB-C
Front camera
Earpiece/Loudspeaker
Volume keys
Power/Lock key
3. Learn more about your new
Nokia
For a printable user guide, online user guide, and
troubleshooting help, go to www.nokia.com/
phones