Table of Contents
Advertisement
Setting Interrupts
Normally, you do not change the default interrupt routing for the LSI inte-
grated SCSI, since performance is usually increased by having two separate
interrupts.
Configuring the LSI Integrated SCSI
In most cases you should not need to change the default configuration of your
integrated SCSI. You may decide to alter these default values if there is a con-
flict between device settings, or if you need to optimize system performance.
The following tables list the configuration settings you can change. The global
settings effect your integrated SCSI and all SCSI devices which are connected
to it. The device settings effect only individual SCSI devices.
Global Default Settings
Settings for the Integrated SCSI & All Devices
SCAM Support
Parity Checking
Integrated SCSI SCSI ID
Scan Order
Device Default Settings
Settings for Individual SCSI Devices
Synchronous Transfer Rate (MB/Sec)
Data Width
Disconnect
Read/Write I/O Time-Out (secs)
Scan for Devices at Boot Time
Scan for SCSI LUNs
Queue Tags
2. Starting
ASUS LSI SCSI User's Manual
Default Settings
Off
Enabled
7
Low to High (0-Max)
Default Settings
40 or 80
16
On
10
Yes
Yes
Enabled
7
Advertisement
Table of Contents
