Advertisement
2. Before replacing the filter element, remove the water tank and place a 2L water container under water
nozzle. Press and hold the Ambient Water button for 3 seconds to drain the internal water. After
completing the drainage, install the water tank back into the machine.
(If internal drainage is not carried out beforehand and the filter is replaced, the filter flushing cannot be
carried out, and the filter life will be affected)
3. The power must be cut off before replacing the filter.
4. As shown below:
①Follow the steps shown below to replace the filter.
Remove the water tank
Pull out the filter
② After the filter is replaced, press and hold the filter reset button for 3 seconds to re-record the life
of the filter.
Open the upper cover
After replacing it with the
new filter, press down the
pressure lever until there
is a "snap" and it is locked.
3 seconds
Filter Reset
11
Open the filter cartridge handle
Place the water tank after
closing the upper cover
Advertisement
