Sony CMT-HPZ9 Operating Instructions Manual page 19

To change the AM tuning interval
(except for European model)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change tile
AM tuning interval, tune in any AM station first.
then turn oflthe system. While holding Di>Dt>0.
press I/(!) on the unit. When you change the
interval, all the AM preset stations are erased.
To reset the interval, repeat the same procedure.
Note
You cannot change the AM tuning interval in Po_er
Saving Mode (page 26).
Tips
• The preset stations are retained for about baH a day
even if you disconnect the power cord or if a power
l,ulure occurs.
• To improve broadcast reception, a_liust the supplied
antennas, or connect a commercially available
external antenna.
To improve tuner reception
When tuner reception is poor. set CD player
power off by CD power manage function.
CD power is factory set to on.
Use buttons oll the unit for the operalion.
1
Press FUNCTION repeatedly to switch the
function to CD.
2 Press I/@ to turn off the system.
3 After "STANDBY" stops flashing, press I/_
while holding l
"CD POWER" and "OFF" appear.
To set CD power on
Repeat the procedure above and "CD POWER"
and "ON" appear.
Notes
• When "CD POWER" and "OFF are selected, disc
access time is increased.
• You cannot change the sclting in Power Saving
Mode (page 26).
You can lislen to a radio slalion either by
selecting a presel station, or by manually luning
in lhe slalion.
Listening to a preset station
-- Preset Tuning
Preset radio stations in the Iuner's memory first
(see "Presetting radio stations" on page 18).
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
TUNER.
2
3
4
Press TUNER BAND repeatedly to
select "FM" or "AM".
Press TUNING MODE repeatedly until
"PRESET" appears in the display.
Press + or- (or TUNE + or- on the unit)
repeatedly to select the desired preset
station.
continued
19G8