Table Of Contents - Toro 22340 Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
The bucket is a load-bearing attachment intended to
be used on a Toro tool carrier. It is designed primarily
for moving rock, dirt, sand, or other materials. Using
this product for purposes other than its intended use
could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
© 2019-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Slope Safety ....................................................... 3
Bucket Safety ..................................................... 4
Maintenance and Storage Safety........................ 4
Safety and Instructional Decals .......................... 4
Product Overview ..................................................... 5
Specifications .................................................... 5
Maximum Material Density at Capacity ............... 5
Operation .................................................................. 6
Installing and Removing the Attachment ............. 6
Filling the Bucket ................................................ 6
Transport Position .............................................. 6
Storage ..................................................................... 7
g282899
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502