Husqvarna 325C X Series Operator's Manual page 22

TECHNICAL DATA
Technical data
Engine
Displacement, cu. in/cm 3
Cylinder bore, inc_mm
Stroke length, inch/mm
Recommended max, speed, rpm
Idling speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893
kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Marmfacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Marmfacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Sound levels (se note i)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997,
dB(A), minimax:
Vibration levels
Vibration levels on the handles, measured
according to
ANSI B175.3-1997, rrds2
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
325C
325Cx.series
1,50124,5 1,50/24,5
1,34134 1,34134
1,06127 1,06127
11 000- 11 700 11 000- 11 700
2 700 2 700
11 700 11 700
0,9/9 000 0,9/9 000
No Yes
No No
Walbro MB 18 Walbro MB 20
Champion
RCJ 7Y
Champion
RCJ 7Y
0,02/0,5 0,02/0,5
Zama C1Q
Zama
C1Q
1,06/0,5 1,06/0,5
9,3/4,2 9,3/4,2
91/98 92/97
2,7/i,5 2,512,1
3,5/i,7 3,212,2
4,0/3,5 4,414,2
6,0/9,0 6,2/8,4
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idle and
i/2
max. speed.
NOTE!
Sound pressure at the user's ear arm vibration on the handles are measured with all the machirm's approved cutting
equipment fitted. The table indicates the highest arm lowest values.
22-
English