Advertisement
ADF tray
TE
8
ADF securing screws
Tray securing screws
-)
(2 pes.)
ADF mounting screws
QO
©
Right cover
Left cover
1 pe.)
{1 pe.)
SES
Sa~
)
Unplug the power cord fromthe copier and
follow the procedure below.
External view may differ depending on models.
1.Remove thedocumentcover.
Openthe documentcoverandliftitata slightbackward angle toremoveit.
Inserttheleftandrightcovers (includedparts) intothe holes from whichthe
documentcover has been removed.
Document cover
Right eS
Se}
2. Mountthe ADF/RADF onto the copier.
Remove
the twocut-outs from the rear partofthe uppercoverofthecopier.
Cut-outs
Rear part of
upper cover
Install the two ADF mounting screws.
ADF mounting screws
Fit the ADF mounting screws into the holes in the hinges of the ADF and
secure the ADF with the two ADF securing screws.
ADF securing screws
ADF mounting screw
ADF securing screw
Advertisement
