Sealey SC03 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
instruction protective
manual
gloves
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general
‰
workshop practice regulations are adhered to when using this
cabinet.
WARNING! Use caution when handling and assembling the metal
‰
components. The metal may have sharp edges or corners, the
use of protective gloves is recommended.
Locate cabinet in a suitable working area and secure to a wall
9
with suitable fasteners.
Keep the work area clean and uncluttered.
9
Keep the cabinet clean and tidy in accordance with good
9
workshop practice.
Keep children and unauthorised persons away from the working
9
area.
DO NOT climb, step or stand on the cabinet shelves.
8
DO NOT use the cabinet for any purpose other than that for which
8
it is designed.
DO NOT use in damp work areas.
8
WARNING! The warnings, cautions and instructions referred to in
‰
this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood that common
sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Featuring two large doors, two full shelves and base storage.
Added security provided by cylinder lock, supplied with two
keys. All steel construction, stabilized by an inner cross member.
Supplied flat-packed to save freight cost, simple assembly
required.
Size (W x D x H): 915 x 460 x 1060mm
3. CONTENTS
Unpack all the parts and layout on the packing material. Visually
inspect all panels to check for transportation
Damage.
A1 Back (left hand side)
A2 Back (right hand side)
B1 Side (left hand side)
B2 Side (right hand side)
C Cross member
D Base
E Base outer fascia
F Top
G Shelf
2 SHELF 2 DOOR FLOOR CABINET
MODEL NO:
X1
X1
X1
X1
X1
X1
X1
X1
X4
Original Language Version
SC03
SC03 Issue 2 (ALL) 17/10/23