Table of Contents
Advertisement
HOW TO SET UP YOUR LED DIGITAL CLOCK
Setup Requires:
• LED Digital Clock
• Power Adapter
• VERSATRACK™ Hang Hooks (2)
• Instruction Manual
Optional (Not Included)
• (2) AAA batteries
Be sure to use high-quality alkaline or lithium batteries.
STEP 1
Insert batteries and plug in the power
adapter.
NOTICE:
Batteries are a backup power source to preserve settings in
the event of a power outage. Power adapter is required as the
power source of this product.
STEP 2
Set the Time, Date & Units
Press and hold the "SET" button to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink
on the LED Digital Clock.
To adjust the currently selected (flashing) item, press and
+
–
release the "
" or "
" buttons (press and HOLD to fast
adjust).
To save your adjustments, press and release the "SET" button
to adjust the next preference. The preference set order is as
follows:
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR MONTH
• CALENDAR DAY
• CALENDAR YEAR
You will automatically exit SET MODE if no buttons are
pressed for 5 seconds. Enter SET MODE at any time by
pressing and releasing the "SET" button.
NOTE:
Date setup is for Daylight Saving Time recognition only and
will not be displayed on the clock.
STEP 3
Backlight Settings
This digital clock's color display features 5 different lighting
settings: 100%, 75%, 50%, 25%, 10%.
When the display is powered with the power adapter,
the backlight remains on at 100% brightness by default.
Manually adjust the backlight brightness by pressing and
+
–
releasing the "
" or "
" buttons when not in SET MODE.
2
To enter Auto Dim mode, press the "
shown on the display.
Auto Dim Mode
Automatically adjusts display brightness based on time of day.
6:00 PM - 5:29 AM = transitions down to 10% brightness
5:30 AM - 5:59 PM = transitions up to 100% brightness
–
" button until
is
Auto
Advertisement
Table of Contents
