•
Use and save these instructions.
•
For optimal fit and function, make sure that you have
selected the correct product for your use.
•
Do not change or remove parts on the product. Only
do changes that are given in this operator's manual.
•
The noise attenuation of the product will be severely
impaired if you do not follow the instructions in
this operator's manual. Ear-muffs, and in particular
cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and
Maintenance on page 9 .
leakage. Refer to
•
This product may be adversely affected by certain
chemical substances. Further information should
be sought from the manufacturer. Keep away
from aggressive substances and clean the product
regularly. Use a cloth with water and soap. Do not
wash or put fully into water.
•
All service and repair work must be done by an
approved service workshop. Only use Husqvarna
original spare parts.
•
Never use the ear-muffs longer than 10 years from
the manufacturing date stated on the packaging.
•
The functionality of the product may deteriorate with
battery consumption.
Safety instructions for operation
•
The wearer should ensure that the ear-muffs are
worn at all times in noisy environments.
•
Be more careful and listen for warning signals when
you use the product. The noise from warning signals
can be decreased when you use the product.
•
The audibility of warning signals at specific
workplace may be impaired while using the
entertainment facility.
•
Make sure that the product is not hit during
transportation and use.
•
Only use the product between temperatures -20°C
and +55°C/-4°F and +131°F. If you use the product
in other temperatures, this can cause damage to the
electronics, battery and mechanical parts.
•
Make sure that you know how to use the product
before use. Speak to your servicing dealer if there is
damage on the product. Do not open the casing!
•
The fitting of hygiene covers to the cushions, may
affect the acoustic performance of the ear-muffs.
Always use original accessories.
Introduction
WARNING:
before you assemble the product. Make
sure that the sealing rings are tight against
your head and around your ears before you
operate the product.
4
Assembly
Move your hair to the side
•
Do not push the earmuffs against the helmet shell. If
you do that, it can cause cracks around the side of
the helmet.
•
Do not put the product in storage at temperatures
above +55°C/+131°F, for example on a dashboard.
Do not put the product in storage at temperatures
below -20°C/-4°F.
•
The wearer should ensure that the ear-muffs are
fitted, adjusted and maintained in accordance with
this operator's manual.
•
The ear-muff is provided with safety-related audio
input. The user should check correct operation
before use. If distortion or failure is detected, the
user should refer to the manufacturer's advice for
maintenance.
Battery safety
•
The earmuff is provided with level-dependent
attenuation. The user should check for correct
operation before use. If a malfunction or fault is
detected, the user should follow the manufacturer's
instructions for maintenance.
•
The product contains battery and electrical
components that may cause ignition in flammable or
explosive atmospheres. Do not use in environments
where sparks may cause a fire or explosion.
•
Only charge the product within temperature range
0°C to +40°C/+32°F to +104°F. Charging outside
temperature range can damage the electronics and
battery.
To put on the earmuffs with headband
1. Put the headband across the top of your head.
2146 - 003 -