Page 1
Form No. 3454-733 Rev A LED Work Light Kit RT1200 Trencher Model No. 144-2581 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Remove the work lights.
Page 2
Preparing the Machine Disconnect the 2-pin connector from the 2-socket connector, and remove the 2 rear work Park the machine on a level surface and engage lights from the rear lighting mount plate. the parking brake. Note: Discard the 2 rear work lights. Lower the attachment, shut off the engine, remove the key, and wait for all moving parts to stop.
Page 3
Install the 8 screws (#10 x 1/2 inch) into the 2 adapter plates. g407252 Figure 4 1. Adapter plate 2. Screw (#10 x 1/2 inch) g407154 Figure 6 Install the 2 adapter plates to the front lighting 1. LED work light 2.