Notes Before It Works Serving; Points To Note At Cleaning; Notes On Assembly/Disassembly - Canon Super G3 FAX Board-AS Service Manual

Table of Contents

Advertisement

Notes Before it Works Serving

• At servicing, be sure to turn off the power source according to the specified steps and disconnect the power plug.
• Do not turn off the power switch (of the host machine) when downloading is under way. Turning off the main power switch
while downloading is under way can disable the machine.

Points to Note at Cleaning

When performing cleaning using organic solvent such as alcohol, be sure to check that the component of solvent is vaporized
completely before assembling.

Notes on Assembly/Disassembly

Follow the items below to assemble/disassemble the device.
1. Disconnect the power plug to avoid any potential dangers during assembling/disassembling works.
2. If not specially instructed, reverse the order of disassembly to reinstall.
3. Ensure to use the right screw type (length, diameter, etc.) at the right position when assembling.
4. To keep electric conduction, binding screws with washers are used to attach the grounding wire and the varistor. Ensure to
use the right screw type when assembling.
5. Unless it is specially needed, do not operate the device with some parts removed.
6. Never remove the paint-locked screws when disassembling.
CAUTION:
English
CAUTION
The fuse may be in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
German
VORSICHT
Die Sicherung kann sich im Nullleiter befinden und das Hauptnetz muss abgetrennt werden, um die Phasenleiter
stromlos zu machen.
2
Safety Precautions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super g3 fax board-as2

Table of Contents