Advertisement
e Insert the power plug firmly into the
AC outlet.
e Press the POWER button to ON.
e Check the connections and re-connect
correctly; select the correct input
source,
els the power cord disconnected from
the AC outlet?
els the power button set to OFF?
e Are the input/output cords are connect-
ed to the VCR and monitor TV correct-
ly, and is the required source selected
correctly?
e Does the position of the signal select
switch match those of the input select
switch on the monitor TV and the video
output switch on the playback VCR?
e Are the video/audio fader controls set
to the OUT positions?
els the BYPASS button set to ON
(indicator is lit)?
e Has the MONITOR SELECT
"PROGRAM" button been set to OFF?
els the WIPE ON/OFF or COLOR
BALANCE ON/OFF button set to OFF
(indicator not lit)?
No power.
The picture and sound
are not output correctly.
e Set the signal select switches (COM-
POSITE or Y/C) on the monitor TV and
playback VCR so they match the
signal select switches on the JX-SV77.
e Set the video/audio fader controls
to their IN positions.
e Press the BYPASS ON/OFF button
to OFF.
e Press the MONITOR
SELECT
"PROGRAM"
button to ON.
e Press the WIPE ON/OFF or COLOR
BALANCE
ON/OFF button to ON.
Fader or wipe control
does not function.
11-12
13, 15, etc.
als the connection cable connected to the | eCheck the connection and correct.
recording VCR correctly?
e ls the input select switch on the
recording VCR set to the "EXT"
position?
Processed picture is seen
correctly on the monitor
screen but not recorded
on the VCR.
e Set the input select switch on the
recording VCR to the "EXT"
position?
Refer to the
instruction
manual of
the VCR
used, again.
e Are the REMOTE PAUSE jacks on
both playback and recording VCRs
connected correctly to the EDITING
CONTROL jacks (PLAY, REC) of the
JX-SV77?
e Are you using a JVC VCR witha
REMOTE PAUSE jack?
Character Generator does
| els the INSERT ON/OFF button set to
not enter the create mode.
the ON?
function.
e Check the model No, of the VCR used.
The Editing Control function of the
JX-SV77 works only when used with
JVC VCRs with REMOTE PAUSE
jacks.
ePress the INSERT ON/OFF button
once to set to OFF.
e Press the MEMORY
button to store the
created titles and switch to the next
page.
e Press the MEMORY
button to leave
the create mode.
Characters are not output
| els the create mode engaged?
to the REC OUT
connector.
—26-
Advertisement
