Chapter 3 Operation; Starting Communication; Connecting To A Remote Site - Sony RSE-500 Operating Instructions Manual

Chapter
Operation
Starting Communication
To connect to a remote site, dial the telephone number
as you would call a normal telephone.
The Video Transmitter can send and receive voice,
pictures and control data via one ISDN (BRI) line.
- Connecting to a Remote Site
You can connect to a remote site in the following two
ways. The connection method is different depending
on whether a remote site has been registered or not.
To connect to a registered remote site
You have to register a called party in the SETTING
menu before the communication.
For details, see "Registering Called Parties" on page 2-15
(EN).
* If the DIAL LIST menu is displayed, start from Step 2.
1 Select the DIAL LIST from the main menu.
The DIAL LIST menu appears.
r
DIAL LIST-
L.OFFICE A
-OFFICE
.OFFICE
-OFFICE
-OFFICE
«OFFICE
.OFFICE
-OFFICE
-DFFICE
10.OFFICE
«$5| <+> «EXIT? <DIAL>
'Owu€oxoOou RON
Cera nmacocg
2 Select the remote site to connect using 4 or ¥, then
press ENTER.
The following screen appears and the system starts
the connection process.
98-07-04 09:53:16 #001
NOW CONNECT ING...
When the remote site is connected, the picture
from the remote site 1s displayed.
To cancel the connection before connecting
to a remote site
Press «.
If you are using the tablet (WACOM ArtPad II for
Windows, not supplied), select (CANCEL) on the tablet.
To move from page to page on the DIAL LIST
menu
Move the cursor to <¥> using € or æ, then press
ENTER. Each time you press ENTER, the next DIAL
LIST menu is displayed.
Move the cursor to «4 using € or ®, then press
ENTER. Each time you press ENTER, the previous
DIAL LIST menu is displayed.
ééesétttcct teet