Table of Contents
Advertisement
SECTION
3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order
given.
3-1. FRONT PANEL
* When removing the front panel assembly on electric power
failure, first open the loading block by turning cam with a
screwdriver as shown in the figure, next pull out the load-
ing block with hand, and remove the loading panel as
shown in the figure, Then remove the front panel
assembly.
Ө Remove loading panel in the arrow direction.
3-2. MD (BU-5BD10B)
@ Turn the cam to the direction of arrow (Counter clock
wise) by minus screw driver.
Ө Таке off the disc table.
© Remove the yoke bracket.
© Remove the MD (BU-5BD10B) to the direction of
arrow.
bottom of chassis
@ Turn in the direction
of the arrow.
Ө Pull out side table.
© BU-58D10B
Мы.
© Yoke bracket
8
Advertisement
Table of Contents
