White/Black Clip; Gamma Control; Hue Control; Chroma Nr (Noise Reduction) - Sony XV-C900 Operating Instructions Manual

White/Black Clip
Compensating color with bright (dark) segments of the
image
When the video image is adjusted referring to a color other
than white or black, white and black objects may not appear
natural. Even in that case, the WHITE (BLACK) CLIP
function allows you to compensate color with the white
(black) segments of an excessively bright (dark) screen.
Press the WHITE (BLACK) CLIP switch. Adjust the white
(black) balance compensation level using the control.
Turn the control fully to the right to maximize the
compensation level. When it is set to the leftmost position
(minimum), the level is the same as when the WHITE
(BLACK) CLIP switch is turned off. Both the switch and
control do not function when the WHITE (BLACK)
BALANCE ON/OFF switch is turned off.
| Note
In normal circumstances, use the unit with this switch turned
off.
(ove) (ol mt Xela ice)
Adjusting color intensity 'D|
* Turn the control clockwise to obtain a deeper color.
¢ Turn the control counterclockwise to obtain a lighter color.
* In normal circumstances, set this control to the center
click position.
Gamma Control
Correcting pictures that are either too bright or dark E
* To brighten a dark subject on a bright background, turn
the GAMMA control towards HIGH.
* To make a bright subject on a dark background easier to
see, turn the control towards LOW.
¢ In normal circumstances, set the control at the center click
position.
Hue Control
Adjusting the hue
* Turn the control clockwise to intensify green.
¢ Turn the control counterclockwise for a purplish picture.
« In normal circumstances, set the control to the center click
position.
Chroma NR (noise reduction)
Reducing color flickers [Fi
© Turn the CHROMA NR switch on to reduce color flickering
caused by repeated editing.
* This function does not affect normal images.
13