Table of Contents
Advertisement
Side Panel Input/Output
TV Side Panels
{ 2 ......................................
_ _jmlo
MM _
_
..................
5
8
4
1. Headphone
The Headphone Output sends the TV's connected audio
signals to a pair of headphones. The audio output from the
TV's speakers will be unavailable.
2. Audio
Out
The Audio Output
sends the TV's connected
audio signals to
an A/V receiver or other equipment.
3. Inputs
1-2
These inputs can be used for the connection
ofa VCR, Super
VHS (S-VHS)
VCR, laser disc player, or other A/V device to
the TV. With each input, you may connect to the S-VIDEO
or VIDEO
terminal
but not to both.
4. ANT
(Antenna)
ANT receives signals from VHF/UHF
antennas or a cable
system.
5.
Component
Inputs
1-2
These inputs can be used for the connection
of A/V equipment
with component
video outputs,
such as a DVD player or
compatible
Video Game System.
Please see Appendix
B, page
58, for signal compatibility.
,
7.
,
,
PC Input
(60 Hz)
This input can be used for analog RGB signals from a
personal computer. Supported resolutions include VGA,
SVGA, XGA, and WXGA only.
PC Audio
Input
This output is used to input the sound from your computer to
the monitor's speakers.
MonitorLinkWDVI
(with HDCP)
This is a Mitsubishi-exclusive
proprietary digital interface for
the display of high quality digital video signals from Mitsubishi
products such as the HD-5000
HDTV
Receiver/Controller.
All video signals, both analog and digital are sent digitally to
your Mitsubushi TV. Can also be used as a DV1 input for
other compatible
sources.
Note: The DVI-HDTV
input terminal
is compliant
with the
EIA-861 standard and is not intended for use with personal
computers.
MonitorLink
"_ Control/RS-232C
A digital control interface
that works in parallel with
MonitorLink.
While MonitorLink
provides the digital video
signal, MonitorLink
Control provides enhanced
functioning
such as automatic
power ON/OFF
and input selection.
Can
also be used with other compatible
RS-232C external devices.
Please visit www.mitsubishi-tv.com
for more information
or
RS-232C command
structure.
11
Advertisement
Table of Contents
