Hitachi PS-48 Instruction Manual page 4

CONTROLS
* Howling
Cartridges are very sensitive and may pick up slight
sound pressure or vibrations of the speaker coming
along the floor or through the air — resulting in
howling.
Therefore, the location of your turntable
is very important.
Find a location which is very
stable and free from vibration.
* Induction Hum
* Overhang adjustment
Overhang
Center. of
platter
* Removal of Dust Cover
The dust cover is designed for easy removal. When
the turntable is to be used without the dust cover,
remove it as follows:
Open the dust cover.
Slide the cover carefully in the direction of the
arrow (f) as shown in Fig. 2, then pull it in the
direction of the arrow @).
To replace the cover, simply follow the above
instructions in the reverse order.
NEON LAMP CASE
Since operation
of the servo-amp. is unstable
for
approx. 30 sec. after power is switched on perform
pitch control approx. 30 sec. after the platter starts
revolving.