Advertisement
~
CAUTION
This content Indicates "risk
of
injury."
Power supply
,
Do
not use an AC outlet where the power plug fits loosely
when inserted.
Failure to observe this may cause a fire, electric shocks, or
burns.
, When disconnecting the power
plug,
always hold the plug
itself and not the cord.
Pulling by the cord can damage it and cause electric shocks or
a
fire.
,
Insert the power plug firmly all the way into the AC outlet.
Using the unit when it is not plugged in sufficiently can cause
dust to accumulate on the plug, causing a fire or burns.
Installation
, Do not place the unit in an unstable position where
it
might
accidentally drop or fall over and cause
injuries.
,
When installing this
unit,
do not obstruct heat dissipation.
-
Do not cover it with any
cloth.
-
Do not install it on a carpet or rug.
-
Do not install the unit in other ways than indicated.
-
Do not use the device in a confined, poorly-ventilated
location.
Failure to observe the above may trap heat inside the unit,
causing a fire or malfunctions. Ensure that there is adequate
space around the unit: at least 10 cm (4 in) on top, 10 cm (4 in)
on the sides, and 10 cm (4 in) on the rear.
, Do not install the unit in places where it may come into
contact with corrosive gases or salt air or places that have
excessive smoke or steam.
Doing so may result in malfunction.
,
Avoid being near the unit during a
disaster,
such as an
earthquake.
Since the unit may tip over or fall and cause
injury,
quickly
move away from the unit and go to a safe place.
, Before moving this unit, be sure to turn off the power switch
and disconnect all connection cables.
Failure to observe this may damage the cables or cause you or
someone else to trip and fall.
, For proper mounting the sound bar on a wall, make sure to
have
it
done by the dealer from where you purchased this
product or by qualified service personnel.
Failure to observe this may cause the installation to fall and
result in
injury.
Installation requires
special
skills and
experience.
Hearing loss
,
Do not use this product for a long period of time at a high or
uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in
the ears, consult a physician.
, Before connecting the unit to other devices, turn off the
power for all
devices.
Failing to do so may result in hearing loss, electric shock, or
device damage.
Maintenance
,
Remove the power plug from the AC outlet before cleaning
the unit.
Failure to observe this may cause electric shocks.
Handling
, Do not insert foreign materials such as
metal
or paper into the
bass reflex port on each side of this unit.
Failure to observe this may cause a fire, electric shocks, or
malfunctions.
, Be sure to observe the following:
-
Do not stand or sit on the unit.
-
Do not put heavy items on top of the unit.
-
Do not place the unit in a stack.
- Do not apply unreasonable force to buttons, switches,
input/output terminals,
etc.
-
Do not hang on the unit installed on a
wall.
- Do not lean against the
unit
installed on a wall.
Failure to observe these may cause injuries
or
damage to the
unit.
,
Avoid pulling the connected cables to prevent injuries or
damage to the unit by causing it to fall.
, Do not operate the unit if the sound is distorting.
Prolonged use in this condition could cause overheating and
result in fire.
Battery for the remote control
,
Do not
use batteries
other than specified
batteries.
Doing so
may
cause fire or burns,
or
result in
fluid
leakage that
may cause skin inflammation.
,
Do not put in a pocket or
bag,
carry, or store batteries
together with pieces
of
metal.
The
battery could short, burst, or
leak,
causing a fire
or
injury.
,
Always
make
sure all batteries are inserted In conformity with
the+/- polarity markings.
Failure to
do
so
might result
in a fire,
burns, or inflammation
due to fluid leaks.
, When the
batteries
run out, or if the unit is not to
be used
for
a
long
time,
remove the batteries from the
remote
control to
prevent
possible leakage of the
battery
fluid
.
, When
storing or discarding batteries, insulate
t
he terminal
area by applying
tape, or
some
other protection
.
Mixing them with other
batteries
or
metal objects
can cause a
fire, burns, or inflammation
due
to fluid.
Notice
Indicates points that you must observe
In
order to
prevent product failure, damage or malfunction and data
loss.
Power supply
•
If not using the unit for a
long period oftime, be
sure to
unplug
the power
plug
from the
outlet.
Even if this
unit is
turned off, a minute current is still flowing.
Installation
•
Do
not
use
this unit in a location that is exposed to
direct
sunlight that
becomes
extremely
hot,
such as near
a
heater, or extremely cold,
or that
is subject to excessive
dust or vibration. Failure to
observe
this may cause the
unit's panel to
become deformed,
the internal components
to
malfunction,
or for
operation
to
become
unstable.
, If using a wireless function,
avoid
installing this
unit
near
metal waits
or desks,
microwave ovens, or other wireless
network
devices.
Obstructions could shorten the transmission
distance.
Connections
, Do
not connect this
product
to
a public Wi-Fi and/or
Internet Service directly. Only
connect this
product
to
the
Internet
through
a
router
with
strong password
protections.
Consult your router manufacturer
for
information
on optimum security practices.
, If
connecting
external devices,
be sure to
thoroughly
read
the
manual
for each
device and connect them
in
accordance with the
instructions.
Failure to properly handle a device in accordance with the
instructions could cause malfunctions.
• Do
not connect this
product to industrial devices.
This product has been designed
to connect
to consumer-
use
devices.
Connection
to an industrial device could
cause
this
product
to
malfunction.
Handling
, Do not place
vinyl,
plastic, or
rubber
products on
this
unit.
Failure
to
observe
this
may cause discoloration
or
deformation
in
the panel of
this
unit.
, If
the ambient temperature changes drastically
(such as
during unit
transportation
or under
rapid
heating or
cooling) and there is
a
chance condensation
may
have
formed in the
unit,
leave
the unit for several hours
without
turning on the power until it
is completely
dry
before
use.
Using
the unit while
there
is condensation can
cause
malfunctions.
Maintenance
, When
cleaning the
unit,
use a dry,
soft
cloth. Using
chemicals
such as
benzine or thinner, cleaning agents, or
chemical scrubbing
cloths can cause discoloration or
deformation.
Disposal or transfer
,
Before
you
transfer ownership
or
dispose of this product,
initialize the product
settings
to default. If
you transfer
ownership
or
dispose of
this
product without initializing
the settings, your
personal data may be
stolen
by a third
party.
, If you
plan to transfer ownership of
this
product, include
this
document and the supplied accessories along with the
product.
, Follow
the rules of your
local
authority to
dispose
of this
product and its accessories.
, Be
sure
to discard used batteries
in
accordance with local
regulations.
This
product
contains
a battery that
contains
perchlorate
material.
Perchlorate Material-special
handling may
apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
(583-M0l
percholorate 01)
This applies
only
to
products distributed by Yamaha
Corporation of America
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
https://download.yamaha.com/
YAMAHA CORPORATION
10-1
Nakazawa-cho,
Naka-ku,
Hamamatsu,
430-8650
Japan
Advertisement
