Table of Contents
Advertisement
TV/VCR Hookups
Overview
This section describes how to corinect video
componerits to the amplifier. For specific locations of
the jacks, see the illustration below.
VIDEO 1
VIDEO 2
-TV
Hookups
The arrow => indicates signal flow.
You can listen to the sound from VCR or TV by
connecting the audio signal from VCR or TV to the
amplifier.
=
=
=
= Ss
S=_
To TV audio input
Euro AV Cable (not
supplied)
Amplifier
VIDEO 1 or 2 AUDIO IN
Scart adaptor
(supplied)
|
T
"CY Use the function buttons (TV, VIDEO2, AUX) to select
the VIDEO 1 AUDIO OUT signal. You can record this
audio signal by connecting a recording component such
as a cassette deck (to the VIDEO 1 AUDIO OUT jack).
Ahk
"@ Ifyou have another component, such as a second VCR
or LD player, connect it to the remaining VIDEO
AUDIO IN jacks.
Getting Started
Piseieg hae
ea ONO
a
a eae
Audio Component Hookups —
Overview
This section describes how to connect either an entire
audio system or an individual audio component to the
amplifier so you.can listen to stereo sources in.
surround sound.
For specific locations of the jacks, see the illustration
below.
What cords will | need?
Audio cord (not supplied) (1)
Hookups
The arrow => indicates signal flow.
Audio system
Connect the PRE OUT, ADAPTER OUT, or TAPE REC jacks
on your control amplifier to the AUX IN jacks on the
amplifier.
CD player (etc.)
Connect the LINE OUT jacks on your CD player (etc.) to the
AUX IN jacks on the amplifier.
empuHeE
CD Player (etc.)
5
Advertisement
Table of Contents
