58
Operating
Radio Operations
Be sure that the antennas are connected.
(Refer to the page 28)
Listening to the radio
1. Press 输入 until TUNER (FM) appears in the
display window. The last received station is
tuned in.
2. Press and hold 调谐 (-/+) for about two seconds
until the frequency indication starts to change.
Scanning stops when the unit tunes in a station.
Or Press 调谐 (-/+) repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
4
1. Press 输入 until the TUNER (FM) appears in the
display window.
2. Select the desired frequency by using 调谐
(-/+).
3. Press 确定 (b) a preset number will flash in the
display window.
4. Press 预设 (-/+) to select the preset number you
want.
5. Press 确定 (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting a saved station
1. Press 预设 (- / +) to select a preset number you
want to delete.
2. Press 清除, the preset number will blink in the
display window.
3. Press 清除 again, to delete the selected preset
number.
Deleting all the saved stations
Press and hold CLEAR for two seconds.
"ERASE ALL "will flash up. Press 清除 again. Then all
the saved stations are deleted.
Improving poor FM reception
Press B (blue) (单声道/立体声) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.