Table of Contents
Advertisement
TOSHIBA
SX-150C
2. OPERATION
2—1
UNPACKING INSTRUCTION
or shock in transit.
a) Safety locking of phono motor.
b) Special packing of the turn table (with table sheet and belt).
2—2
ASSEMBLY
PROCEDURE
a) Be sure to remove two screws locking the motor as shown in figure 3.
C)
(1) Set speed change lever to the speed of 33 1/3 rpm.
'it. over the motor pulley.
(4) Be sure to place the beit through the belt guide.
(CAUTION)
|
.
Be sure to do not pass the drive belt as the drive belt is twisted.
Be sure to keep off the drive belt from oil.
How to assemble pickup arm
(2) Attach the arm-weight to the rear end of the arm.
Turntable sheet
Turntable
Drive belt
Motor locking screws
Adaptor holder
Motor pulley
Belt guide
Speed change lever
| Turntable
shaft
Arm weight
Arm elevator
Arm rest stand
Pipe arm
Head shell
PLAY /CUT lever
)
Advertisement
Table of Contents
