Installation; Installing The Washing Machine; Securing The Machine; General Operating Conditions - Miele PWM 514 Operating And Installation Instructions

Installation

42

Installing the washing machine

The washing machine must be installed by Miele Customer Service
or by an authorized dealer. Please observe the instructions in the
installation plan.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
To avoid the risk of frost damage, the washing machine must not be

located in rooms which may be subject to very low temperatures.
Transport the machine on a pallet truck inside the room.

Machines with feet must not be pushed to move them.
This could damage the machine feet.
Remove the packaging carefully with a suitable tool.

Lift the machine off the pallet using a lifting device.


Securing the machine

The feet of the washing machine must be secured to the floor using

the fixtures and fastenings supplied.
The material provided is intended for use in bolting the machine to a
concrete floor. If other floor types are present at the installation site,
the fastening material must be ordered separately.

General operating conditions

This washing machine is intended only for use in a commercial envi-
ronment and must only be operated indoors.
Ambient temperature in installation room: 32°F (0°C) to 140°F (40°C)
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the machine's installation site inspected and seek the ad-
vice of a specialist in instances where increased noise may cause a
nuisance.