Connecting To A Computer And The Power; Interface Connector Locations; Power Supply Connection - Canon imageFORMULA DR-G2140 User Manual

Connecting to a Computer and the Power

Connect the scanner to the computer and the power supply. The
scanner can be connected to a USB port or LAN port on the computer.
IMPORTANT
Before connecting the scanner to the computer, verify that the power
of the scanner is OFF. If the power is ON, turn it OFF.

Interface Connector Locations

The USB connector is located on the scanner as shown below.
Power Connector
IMPORTANT
Use only the supplied power cord.

Power Supply Connection

1
Connect the supplied power cord into the power
connector on the back of the scanner. (1)
2
Connect the power cord into an AC outlet. (2)
USB connector
LAN Connector
10
120 V Type
220 - 240 V Type