Yamaha PASC4 Owner's Manual page 54

Main riding
display
[ ]
[S---]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Settings
The display enables the following.
Clock Adjust
Clock setting
Distance Unit
km/mile setting
Display Item
Sets the items to be displayed in the function display
during normal riding.
Record Reset
Resets the values of the trip meter, average bicycle
speed, maximum bicycle speed, and trip time.
Bluetooth (Bluetooth low energy technology)
Switches the profiles and turns off the wireless commu-
[S]
nication function.
USB
[S]
Switches the USB port between a power supply port
and a wired communication port.
[S]
Layout
Switches the layout of the display.
[S]
Brightness
Set the brightness and the color of the display back-
[S]
light.
[S]
1. Press the function select switch for 2 seconds or long-
[S]
er.
2. Select an item by using the assist mode switches (up)
[S]
or (down).
When you select an item to set and press the function
[S]
select switch, the setting will be displayed.
WARNING
For all setting procedures, be sure to stop the bicycle
and perform the required settings in a safe location.
Otherwise, lack of attention to surrounding traffic or
other hazards could cause an accident.
TIP
The settings cannot be adjusted while riding.
If you do the following during setting, the item that you
are setting will be canceled and the display will return
to the main riding display.
Turning the crank (pedal) in the traveling direction
Turning the rear wheel at 1.2 mph (2 km/h) and more
Pushing the walk assist switch
[S---]···· Press the function select switch for 2 seconds or
longer
[S]······· Press the function select switch
[ ¤ ] ······· Press the assist mode switch (up)
[ ¦ ] ······· Press the assist mode switch (down)
50
main riding display.