Advertisement
SUMMARY OF CONTROLS AND CONNECTIONS
REAR VIEW
1.
Power switch
2.
Connector to computer
3.
Audio Right, Left
4.
Power inlet
5.
Connector to printer
Item Explanation
1.
Power switch (toggle) to apply power to the drive (if power is
switched on, then the power-LED on front of the drive will be on).
2.
Parallel port connector, to be used for connecting to the parallel
(printer) port of the computer.
3.
Right and Left stereo audio line out connectors, RCA type.
An external stereo sound system can be connected to these RCA
connectors, for amplifying the sound of discs played on the drive.
4.
Power inlet (3 prong)
Use an appropriate mating power cable to connect the drive to
the mains AC power. The drive has an autosensing power sup¬
ply (100 - 240 VAC nominal, 50-60 Hz), so any voltage within that
range can be used.
4
Advertisement
