Table of Contents
Advertisement
• This unit is designed for storage of products at 2 C to 8 C. Please make sure the temperature
range meets the required storage temperature for your products.
• The refrigeration process may cause a slight discrepancy between the displayed temperature
and the air temperature inside the unit. The phenomenon is normal.
• • Refrigerators are designed for storage only. Warm products should not be loaded into the
unit in large quantity. Such operation will introduce much heat load to the system which may
harm the cooling system. Warm products should be loaded to the refrigerator in small batches.
• Do not damage refrigerating circuit.
• Do not use electrical apparatus without production permit in the refrigerator.
Operation after recovery from power failure
The control system is a non-volatile system, which retains the control parameters even when there is
a power outage. The unit will resume operation using the same parameters previously set.
• If a unit is powered down, allow a minimum fi ve minutes before turning the unit on
Warning
again.
• If a refrigerator is left unused for a long time in a unsupervised area, make sure
children can't have access to it. The door should not be closed completely.
11
Advertisement
Table of Contents
