Product Introduction - Beko CT M 30 Instruction Manual

● If any parts and components of this electrical water heater are damaged please contact customer
care center for repair.
● This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
● Children should be supervised to ensure that they do not play with the appliance.
● The maximum inlet water pressure is 0.5MPa; the minimum inlet water pressure is 0.1MPa, if this
is necessary for the correct operation of the appliance.
● The water may drip from the discharge pipe of the pressure-relief device and that this pipe must
be left open to the atmosphere; The pressure-relief device is to be operated regularly to remove
lime deposits and to verify that it is not blocked.
● In order to drain away the water inside the inner container, it can be drained away from the
pressure release valve. Twist the thread screw of the pressure release valve off, and lift the drain
handle upwards.(See Fig.1) A discharge pipe connected to the pressure-relief device is to be
installed in a continuously downward direction and in a frost-free environment.

2. PRODUCT INTRODUCTION

2.1 Technical Performance Parameters
Volume
Model
(L)
CT M 30 28
CT M 50 47
CT M 80 73
CT M 100 92
CT M 120 110
Rated Rated
Power Voltage
(W) (ACV)
1500 220-240
1500 220-240
1500 220-240
1500 220-240
1500 220-240
Rated Max Of Water
Pressure Temperature
(MPa) (℃)
0.75 75
0.75 75
0.75 75
0.75 75
0.75 75
3
Protection
Waterproof
Class
Grade
I
IPX4
I
IPX4
I
IPX4
I IPX4
I
IPX4