The Timer; Setting The Clock - Sony CFD-676 Operating Instructions Manual

fe
24
The Timer
Setting the clock
Before you set the clock, insert four size
1 Press and hold CLOCK/TIMER for about two
seconds until "AM" or "PM" and the hour digit
flash. >
2 Press TUNING/TIME SET +/~ until you set the
current hour. Then press ENTER /MEM..
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/-— until the correct
minute is displayed.
eho => ay
3PM BEG PM GYS
LN
3 Press CLOCK/TIMER again.
The clock starts from 00 seconds.
The Timer