Husqvarna DC 350S Assembly Instructions Manual page 6

7
Slide axle completely through undercarriage; be sure to catch the drawbar when
sliding the axle. Align drawbar with the front support and press down to latch.
8
Slide washers and wheels onto axle and secure with hairpins as shown.
NOTE: TIGHTEN
ALL HARDWARE
AT THIS TIME
9
Attach the support bar to body
behind flange loosely.
18
Assembly Instructions
10
19
19
5
MAKE SURE
VALVE STEM
IS FACING OUT
17
23
19
BEHIND
FLANGE