Table of Contents
Advertisement
EBU00354
Drive chain cleaning and lubrication
The drive chain is equipped with rubber O-
rings between the chain plates. Steam
cleaning, high-pressure washes, and cer-
tain solvents can damage these O-rings.
Use only kerosene to clean the drive chain.
Wipe it dry, and thoroughly lubricate it
with SAE 30 ~ 50 motor oil. Do not use any
other lubricants on the drive chain. They
may contain solvents that could damage
the O-rings.
1. O-rings
EBU00356
Cable inspection and lubrication
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged. Cables can also become
frayed or kinked. Operation of controls
could be restricted, which could cause
an accident or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace dam-
aged cables.
q
Lubricate the inner cables and the cable
ends. If the cables do not operate smooth-
ly, ask a Yamaha dealer to replace them.
8-35
q WARNING
Advertisement
Table of Contents
Troubleshooting
