Advertisement
Quick Links
5. Door Hinge Movable Range
Attach a hinge so that it can move within the shadowed range WY
in Fig.13.
5. BRE YY OER
Ri
EVIOBES,
B130 GY BERTUTEZ U.
EERW)
|
13
Fig.13
6. mT H/S
XVEN10 Ci FAN-BASDESBSlS,
MFN-
14k
MUBRL
T< REVU.
6. Terminal Cover
When XVEN10 and Terminal cover are combined, cut the Terminal cover so that
Fig.14 shows.
14 Fig.14
(1)REZRITS
BSE,
BP/\Y
RDR
AA OPEN (CA HtTHH
<BR
ALY,
and then open the door.
(2)BOSEAd,
BAOBELOSSCRORABEL THE.
7. Notes on handling
As these handles are used for interlock device between breaker and door, they don't
have strength of keeping all door weight of applicable control box.
Make sure that the following (1), (2) are done when you handle then.
(1) Before opening the door, make sure that the handle lever is set to "OPEN"
(2) Make sure that the door is fixed by stopper during the control box is operating.
TOSHIBA
INDUSTRIAL
PRODUCTS
SALES
CORPORATION
9-11, Nihonbashi-honcho 4-Chome,
Chuo-ku, Tokyo, 103-0023 JAPAN
Tel : +81-3-5644-5502
URL
http://www.toshiba-tips.co.jp
mmm
mmm
EES
arn Te
ng
a
ne
ee
eee]
|
54780443
RESERV
AT Lats
T 103-0023
RRa PRE ARBRE 47
A 9B115 (BIPRE)
Tel : (03) 5644-5502
URL
http://www.toshiba-tips.co.jp
TOSHIBA
aE
LDE10103
= / INSTRUCTION
MANUAL
Rie —E1—ZAjEAE: RBM
compact ESPAR Y Y -X
_ TOSHIBA NO-FUSE CIRCUIT BREAKERS, EARTH LEAKAGE CIRCUIT BREAKERS
(ERTI H22)
ÉA
Type
XVFN10
HABREF SY FJL
Handle Operating Mechanism
(Door panel mount type-H22)
RE ENCORE
RIS, ARCH,
BESKORG
ARZT,
RRAS,
VIP)
SCE B<SRAOE,
ELS CBR<REL. KE, MBICMHET, RAR
HECCHRROPREESOTRICE<
45, CREB.
. COCs,
BE LOFBSBOLNVE
(BS) EkO RE] CL TRD
LUTJET:
|
aza
= OHLBUL, CCSKSBHE*B<StNPHSSBBE
Se
RRARlLEt.
A iE
- DBLBC,
BRELISPREDRETB<HtnDHS
En
PBTRRSB AOMNBEPKATSSCNPHSES
MLE»
AFB
-
ZS,
VLA
(CRU CSBCH,
PRICK TIABAGERIT
EOD < BRED BUVUET o
"RATT, ML,
MIRKE
SOAS
+ ARIS DS BRED > TIT 9 T
CES,
BBBLUGBICLOEKEOSTNPSWETF,
- RR,
HAE,
BO HSSOOISALEWCC
ESL,
"Milt,
FRIES LURT +: ARI SPM
CHOA ABAD
T
CES
'Bm,
Sm,
CAS,
BBHAZ,
BEORD:- HS4 CRSP
CELEC
EAU,
KK,
REESE COSENYPSW
ET,
- H mli MIRE BOMRICLEDP
os TMU
TC ES,
MAC
MaPaoeoxe,
AFREK),
VPORRICHV
ET,
-
IRS AAS CHE
SNK RIV CHEOTIT
TK ES,
ZA,
ALITY — bh, RMS ECRMPRBBARBICASSUEDHLL
CK ESV)
FEAR ER PORMARRS kV
EDENA
ET,
"ETAL SNTWSGWAR
COMET
OSEWC<K ES),
"Hint eT
Swat,
BRRRWCLCMYR
TES,
' BEELCAEODCEMBUDEDD
SSD, FRICKUHRBRUET.
Keo, AWARD eR | (Co TERANO To
X1
Table 1
SAFETY PRECAUTIONS
Ensure proper use of the product, be sure to read this manual and the other attached
documents carefully before starting installation, operation, maintenance, and inspection.
This manual should be given to the person who actually uses the products and is
responsible for their maintenance.
* Within this instruction manual, safety precautions are ranked, in order of importance,
as either Warning or Caution.
/\W A RNING
: Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
ANC AUTION
: Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury and/or
damage to the equipment.
Under certain conditions, improper operation may result in serious injury and/or
damage even if it is labeled only as Caution. Every item indicated by either
Warning or Caution should be considered significant. Be sure to give particularly
care to those items.
/\WARNING
: Turn off the power before starting mounting, dismounting, wiring,
maintenance or inspection. Failure to turn off the power may result in
electrical shock or burning.
|
/\CAUTION
- Do not use deformed or damaged MCCB, ELCB or operation handle,
if deformation or damaging is found out at detaching of package.
' Mounting, detaching, wiring, maintenance and checking should be done
by an authorized or certified person.
* MCCB, ELCB and operation handles should not be used in serve
environment such as high temperature, humidity, dusty, corrosive gas,
excessive vibration and impulse. If they are used in such an environment,
they may result in fire or malfunction.
* Mounting should be done according to the instruction manual.
Failure to mounting may cause malfunction of MCCB, ELCB and
operation handle or cause an incident which may make the operator hurt.
* Screws are tightened in specific torque shown in the instruction manual.
* Dust preventing measures should be done, if the MCCB, ELCB and operation
handle are used in dusty places such as cement plants, iron refineries.
* Don't do reforming to the MCCB, ELCB and operation handle without
authorized permission.
* When the MCCB, ELCB and operation handle are abolished, doing it
according to the abolishing rules or regulations.
Confirm that the specifications of the product received are those of the product
ordered. Also confirm that the specifications of the parts match those in Table 1.
f& & Bifii:mm
Dimension of length:mm
INDY KIVA
|
HAE
e AAA
Applicable breaker type
#8' SB
Handle type
MCCB
ELCB
LES60G, LSS60G
LRS100G, LEH100G
| LRS30G, LES30G, LSS30G
LRS50G, LES50G, LEH50G, LSS50G
Packed parts
M4 X80
fih L
HIN—MRIVA— errr eee
144
Cover holder
Packing
Retainer
Black truss screw
XVFN10
RS30G, ES30G, SS30G
RS50G, ES50G, EH50G, SS50G
ES60G, SS60G
RS100G, EH100G
Advertisement
